Wired or Non-Wired Cables
Wireless networks are fashionable, but installation will not be successful unless you have chosen and configured the right type of network. Wired networks require all computers to be connected to a central location called a switch or hub. This often involves installing cables over walls and ceilings and can be challenging for anyone.
If home or office computers are within 500 meters of each other, you can have a wireless network for you. The wireless network has no cables. You can connect computers at different levels of a building or even on the street. With the obvious advantage of lack of wires, wireless networks are much more convenient because installation, configuration, and reconfiguration can often be done within minutes without extensive planning.
Wireless networks, however, are not as fast as wired networks. When you play computer games or watch streaming video or other high-speed multimedia, the wireless network does not have enough capacity. However, if you only want to check emails and view webpages, your wireless network is a good choice. To install a wireless network, you need a wireless access point and a wireless network card for each computer. For every desktop computer, you need to buy a wireless network card, though one for most newer laptops.
In a wired network, security is not a big problem as someone is physically connected to a wired network to get in. In wireless networks, a car parked outside your laptop can easily connect to your network if not. They have adequate security. To prevent this, encrypt wireless network connections, or set the password to access the network, or both. Do you do it yourself or call a specialist?
If you decide to use a wired network, consider whether to install yourself or hire a specialist. If you have a small number of computers, all of which are very close together, you may be able to purchase and connect pre-assembled network cables. If you need to run more floors and wiring on the ceiling and walls, you need a professional installation. If you choose this route, it is best to start with your office or home floor plan, determine your current needs, and consider how network planning can be tailored to future needs. The professional installer should be familiar with EIA / TIA standards, local wiring and electrical regulations, and make individual cables. Network cabling professionals are often judged by the skill of their work because sloppy wiring deteriorates over time, is more difficult to handle and is a fire hazard.
A wireless network or a wired network does not rule out each other. Many small offices have a wired network along with one or more wireless networks, depending on their needs. Wireless networks are still faster, safer and cheaper. Wired networks continue to exist with wireless networks, often in the same homes and offices.
Network Setup – Wired or Wireless?
Wired or Non-Wired Cables