Call: 0123456789 | Email: info@example.com

Installing cabinet hardware


If you are looking for a kitchen conversion, you can save money by hanging the cabinet doors. It does not require many tools or tools. All you need is plenty of time, patience and a drill machine and a screwdriver. So if you are trying to read the cabinet hardware

Door hinges are the first item you need to install. The door must be raised with the cabinet face and marked with the wrist strap with the stylus. For smaller cabinet doors, two straps can be used, while large cabinets must be three to support extra weight.

Now that there is a hinge on the frame and door, drill a small pilot hole into the door frame with the wrist strap

Hold the door to the hinges and make sure the cabinet is in place. Check the cabinet door door.

It's time to drill the experimental holes on the cabinet doors themselves. Do not drill the door completely. All you have to do is have a shallow hole for the bolt to engage.

The next step is to connect the entire door to the closet. Install the door on the hinges and screw it in. Open and close the cabinet door and check if it is easy to swing and that it is the same as the cabinet lines.

Now that the cabinet doors are hanging, it's time to move on to door installation

doors are new on canvas for new door hardware. You can also mount the buttons or the handles. Both options are a good choice. They need to be fitted in a slightly different way.

When holding the handles, place the handle at the desired location and mark the screw holes with a pencil.

Drill the holes and then screw the handle into place.

Use the key to drill the entire cabinet. Place the handle in the cabinet and locate the base where it touches the front of the cabinet

Place a small point around the track.

Use a small borehole,. Be sure to go outside from outside to avoid crashing.

Now with larger sized drill heads, you need to increase the experimental hole. Be sure to drill until only one hair is larger than the screw to which the button is attached.

Drive the screw from the back of the cabinet on the door leaf and screw it into place

button or a standard handle is a purely personal choice. Any style can be found in a design that highlights new cabinet doors. Now that you know how to install a cabinet hardware, you can save a lot of money on the kitchen conversion. Just have a little patience and you will end soon.

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *