If you would like to know more about choosing hardware related to garden furniture, you would like to read this article. Specifically, I will tell you which type of hardware will best perform, so the metal type used for the fasteners and the purpose used are essential aspects and how to protect or limit the exposure of the furniture to moisture and winter conditions. After you finish this article, you will understand that the most important hardware hardware in garden furniture depends on the style of furniture, the material used for construction, the choice of location, furniture and budget.
helps ensure longevity and improves the overall appearance of furniture. Part of the problem is what hardware to choose if there are so many options available in the hardware store. The typical Lowes or Home Depot is made of stainless steel, zinc-plated, glossy galvanized, smooth steel, coated steel and brass bolts, nuts, washers and bolts. Each clamp is suitable for certain applications, but not all are ideal for outdoor furniture.
In fact, choosing the wrong fasteners can greatly shorten the life of the furniture, contribute to the rotation of wooden furniture, spoil the ugly stain, and make the furniture even safer.
One of the things to note at the beginning is that we do not use unprotected steel fasteners for outdoor furniture. They quickly rust and the steel reacts with tapered strips and tinctate. Tannic acid actually accelerates the corrosion of the fasteners. Have you ever seen a wooden frame with black stripes running down the nails? This fence was fitted with incorrect types of fasteners. The same will happen with the furniture. Even worse, because the fasteners rust, accelerate the decomposition process of woody fibers around the fibrous fasteners, destroy the furniture and are therefore potentially unsafe.
Hot dip galvanized
screws and screws for galvanizing specially designed for outdoor use. Electrolyted galvanized or glossy galvanized fasteners will eventually not stand up, just like hot hot galvanized hardware. Zinc is used as a coating in both processes and acts as a barrier to the elements and the tin in the wood enclosure.
I strongly recommend using screws or screws for outdoor furniture design. The galvanized surface on the nails, whether galvanized or hot, can be easily damaged while hammering them, revealing the nail head to the elements and allowing them to start rusting quickly.
Proper care must be taken when installing galvanized screws. Drill holes on hardwood trees and make sure that you use a piece that is not worn and tends to skip the screw head. For whatever reason, the galvanized screws are not so much wet as other steel fasteners and are more likely to either turn off or the heads are slipping during their installation. Due to the tolerance required for the hot coating coating, the galvanized screws do not have a tolerance over the fibers and are more likely to strike when overturned
Hot-fired galvanized fasteners are a good choice for many outdoor furniture applications including the Adirondack chair but are not the best choice in forests such as teak.
Stainless steel is the best choice for forests with a large amount of tannins, for example in teak. Stainless steel alloy or steel, nickel and chrome. The ratio of other metals and steel determines the corrosion resistance of weather and stainless steel. Because steel is mixed with other softer metals, stainless steel is not so strong, so screw holes are highly recommended in all applications and are indispensable for hardwood such as teak and mahogany. The added corrosion resistance outweighs the deficiencies that can be made of metal, especially for outdoor furniture.
While stainless steel fasteners are most rust resistant, they are the most expensive of the options discussed. However, with the use of stainless steel fasteners, many years of furniture are consumed. In this regard, an investment that will pay in the coming years.
I saw the copper used in some commercial garden furniture but I do not recommend it. While brass does not rust, and it fits well with many wet applications, such as toilets and sinks, it blurs and corrodes. Very sensitive to tannins in wood, which becomes faster. Brass Bolts In Specially Do not Have Sufficient Power For Outdoor Furniture Applications
Outdoor or Board Screws
Over the past few years, many manufacturers have introduced outdoor fixing products specifically for onboard buildings. They are usually green, gray, brown or brown. These screws are provided with ceramic or plastic coating to delay metal reaction with the wood. Each coating method is protected for all manufacturers, and may include galvanized plating and plastic or ceramic baking combinations.
I used these fasteners in furniture constructions and they're just fine. Unfortunately, I could not find this kind of screws. The used bolt was already the Deck Mate and is available in brown and brown colors so that the color can be chosen to fit the used wood better. These screws are provided with a ceramic coating and the manufacturer has provided a coated bite for installation designed to avoid damaging the ceramic coating in the bolt head. If you choose this type of fastener, be sure to compare costs with a stainless steel plate as the price changes. If stainless steel is reasonably comparable to cost, then this would be the recommended fastener.
Always be sure to read the manufacturer's specifications on the box to make sure the screws are suitable for your application.
If you're installing furniture on a covered terrace or patio where they will be protected from the batteries, there is concern over the interaction between the wood and the fastener rather than the weather. Elements of furniture all year round, such as a garden bench or an Adirondack chair in a garden corner, should be created with much greater care and concern to ensure that more than one or two more winter
selecting a type of fastener selected, although this is very important. For example, fasteners should not be placed in a place where they accumulate for longer periods and fasten the fasteners. The bolts that attach the seat belt to an Adirondack chair are a prime example – these screws typically sink on the surface of the wood. This allows the collection of water in the screw holes, shortening the lifetime of all non-stainless steel fasteners and extending the wood's exposure to water, which increases decomposition. For applications where furniture is exposed all year round, the blades must be flushed with the surface of the surrounding wood.
Designing and designing furniture is also an important aspect. Are the horizontal surfaces of the furniture designed in such a way that they allow them to pour water and not collect them? Think of a picnic table on a podium or deck top. The gaps between the panels allow the water to leak from the top and not collect.
Stainless steel is usually the best choice for outdoor furniture, although costs may in some cases prevent it. There are other cheaper recording options that will work well. Do not use unprotected steel fasteners under any circumstances to use outdoor furniture. You know where and how you want to use furniture and plan the conditions you are subject to.